Kodi for PC IOS Football Addons IPTV M3u Sports
Kodi for PC IOS Football Addons IPTV M3u Sports
I am running Kodi 17.1 on a Firestick (Gen 1) from a Upnp source (using JRiver Media Center 22 running on Windows). The Actors, Director, Genres, etc. all work but ALL the files are dated 06/06/1905. I am guessing that Kodi is looking at some field f...
My external hard drive is hooked up to Kodi and Kodi is connected to my network via ethernet cable. I'm wanting to put files on my external hard drive from my laptop which is connected to the network via wifi. How do I do this?
I have a functional VPN setup following the instructions from this video.
https://www.youtube.com/watch?v=Tj1NDMraAkA
After confirming a VPN connection via the VPN Manager setup from the video above, I do an ifconfig -a and get this:
osmc@osmc:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr b8:27:eb:82:a8
2
UP BROADCAST MULTICAST DYNAMIC MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2205816 errors:0 dropped:0 overruns:0 frame:0
TX packets:2205816 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:143620986 (136.9 MiB) TX bytes:143620986 (136.9 MiB)
tap0 Link encap:Ethernet HWaddr fa:0e:25:40:73:64
inet addr:10.10.x.x Bcast:10.10.x.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST DYNAMIC MTU:1500 Metric:1
RX packets:1001885 errors:0 dropped:0 overruns:0 frame:0
TX packets:202636 errors:0 dropped:393 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1349943059 (1.2 GiB) TX bytes:18402154 (17.5 MiB)
wlan0 Link encap:Ethernet HWaddr 80:1f:02:b6:82:a7
inet addr:10.1.1.97 Bcast:10.1.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST DYNAMIC MTU:1500 Metric:1
RX packets:2383842 errors:0 dropped:173531 overruns:0 frame:0
TX packets:360392 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1784221588 (1.6 GiB) TX bytes:59196831 (56.4 MiB)
I modified the TAP inet address for privacy reason. When I go to System and System Info my IP address is still showing my initial NON-VPN Private WIFI address 10.1.1.97. Why doesn't the System Info page in Confluence update to my VPN Internet address when I am connected via my VPN?
I have the below button in my <control type="list"> <itemlayout>. Label is not displayed.
If I change its control type to "label" - labels are displayed. If I change $INFO to $INFO[Weather.Temperature], it is displayed.
The <content> for this list is videodb:// (or musicdb://).
Why such behaviour (and, in the first place, how to avoid it)?
<control type="button">
<description>List item label</description>
<top>0</top>
<left>BaseItemSize</left>
<height>BaseItemSize</height>
<width>LabelWidth</width>
<label>$INFO[ListItem.Label]</label>
<onclick>ActivateWindow($VAR[current_window],$INFO[ListItem.FolderPath])</onclick>
<texturefocus>-</texturefocus>
<texturenofocus>-</texturenofocus>
</control>
Hello guys.
I´ve bought an access to an IPTV premium service. I´ve managed to put the channels working on KODI, but i´m having trouble putting the epg and logos.
I´ve tryed several epg adresses but none worked.
Can someone help me?
KODI 17.1 Krypton on Windows 10 Creatores Update
@Popcornmix,@Milhouse: I respect and fully understand that you guys cannot help in support of thirth party addons, but I hope you can spare a moment to think with me: I run clean installs of the latest Milhouse builds on both x86 and RPI2/3. I use the ...
Hi I've been using an IPTV provider (smarthub) for many months perfectly fine operating Kodi 16.0 and then 16.1. I recently upgraded to 17.1 and all of a sudden i am unable to play HD live streams only - the FHD and SD streams all play smoothly withou...
I have used my NVIDIA Shield TV Remote in Kodi on WINDOWS 7 since Kodi 14 without issues until I upgraded from Kodi 16 to Kodi 17.1. Now my keyboard.xml is ignored. If I press a key on my remote Kodi asks to configure the "controller". I have done th...
I download movies and TV shows to watch because my download speed is too slow to stream. Often it turns out that the subtitles need to be offset by more than the +/- 60 seconds available in the interface. Is there a tweak that I could do to go in and...
When I try to start Kodi 17.1 it crashes and says there is an error. Here is the Error Log: http://pastebin.ca/3794152 Looks like this is the problem: 13:42:01.715 T:14440 DEBUG: CRemoteControl::Connect - connecting to: 127.0.0.1:24000 ... 13:42:39....
Hello I wonder if I must use this option : enable dobly digital ac3 transcoding? I use the latest Kodi on Windows 10, my PC is connected to my audio receiver / speakers through an optical cable, I use SPDIF. My audio receiver supports Dolby, DTS and St...
Dear Sir or Madam, I've just went through major surgery . I now have partial eye sight in my right eye. My system became trashed while I was in the hospital. So I tried to get Microsoft to sell me a new copy of 7 so sin...
Hi Just wondering whats the keyboard shortcut to add to keyboard.xml to switch video streams instead of having to go into the video OSD and selecting stream. Thanks
Dears, I'm facing to one strange issue since KODI17 In the past Kodi15 & Kodi16, I defined in advancedsettings.xml file <lookandfeel> <startupwindow>10134</startupwindow> </lookandfeel> to be able to auto lau...
Hi Since Kodibuntu is discontinued I decided to use std Ubuntu and just autostart Kodi. However I am running into an issue that whenever I change the resolution within Kodi (fullscreen) from high to low (i.e. 4k -> 1080p) I see the Ubuntu side and...