Hey all.
I want to overclock my rpi 2.
But i have made setting “Turbo” in the config file.
# Overclock mode settings.
#
# default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
# no overclocking : 700 | 250 | 400 | 0
# mode ‘Modest’ : 800 | 300 | 400 | 0
# mode ‘Medium’ : 900 | 333 | 450 | 2
# mode ‘High’ : 950 | 450 | 450 | 6
# mode ‘Turbo’ : 1000 | 500 | 500 | 6
Overclock mode settings.
#
# default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
# no overclocking : 700 | 250 | 400 | 0
# mode ‘Modest’ : 800 | 300 | 400 | 0
# mode ‘Medium’ : 900 | 333 | 450 | 2
# mode ‘High’ : 950 | 450 | 450 | 6
# mode ‘Turbo’ : 1000 | 500 | 600 | 6
# mode ‘Pi2’ : 1000 | 500 | 500 | 2
# arm_freq=1000
# core_freq=500
# sdram_freq=600
# over_voltage=6
# set to ‘force_turbo=1’ to disable dynamic overclocking (you can lose your warranty!)
force_turbo=0
Meaby i shall use the “pi2” setting and force turbo?
I can seet in the system info that it runs 600 mhz.
Regards Daniel and thanks